![[POSSIBLE DUPLICATE] Atom ZENIX AT9815/100 LED Floodlight - 100W, 5000K-Atom Lighting-Ozlighting.com.au](http://www.ozlighting.com.au/cdn/shop/files/POSSIBLE-DUPLICATE-Atom-ZENIX-AT9815100-LED-Floodlight-100W-5000K-Atom-Lighting.jpg?v=1792124200&width=1000)
[POSSIBLE DUPLICATE] Atom ZENIX AT9815/100 LED Floodlight - 100W, 5000K
Order code: 14476
Supplier item code: AT9815/100
Floodlights
Atom AT9815/100 — Zenix 100W LED Floodlight - 5000K
Before you buy
- Confirm Atom item 14476 / AT9815/100 with the supplier before ordering: its distributor-reported barcode also appears on an AT9814 catalogue listing.
- Mounting fixings are not included. Installation above 3 m requires a safety chain, and the flying leads require an appropriately IP-rated junction box or equivalent.
- Leave at least 2 cm of cable drop below the gland to keep rainwater draining away. Do not jet-wash the fitting.
- Installation must be carried out by a licensed electrician.
At a glance
Fixture power
Maximum rating: 100 W
Colour temperature
5000 K
IP Rating
IP66
Input voltage
230Vac
Driver Type
Fixed output
Installation Type
Surface mount
Product details
The Zenix 100 W floodlight is Atom item 14476, with a black surface-mount body and an adjustable fitting. Its driver is included and uses fixed output.
The Zenix floodlight uses a tempered-glass diffuser and a powder-coated aluminium enclosure with symmetrical light distribution.
The manufacturer lists general outdoor lighting, small sports areas and private car parks as applications.
Technical specifications
Efficiencies
- Total System Efficiency
- 160 lm/W
- Efficiency scope
- Total system efficiency includes optical, thermal and driver losses; it is distinct from LED-chip or luminaire-only efficiency.
Mechanical
- IP Rating
- IP66
- IK Rating
- IK08
- Adjustability
- Adjustable
- Fitting Colour
- Black
- Product Finish
- Powdercoated
- Body Material
- Aluminium
- Diffuser Material
- Glass
- Installation Type
- Surface mount
Electrical
- Working Temp Range
- 0 to 45 °C
- Input Frequency
- 50 Hz
- Switch Type
- Inline
- Power Factor
- 0.95
- Inrush Current
- 80 A
- Inrush Duration
- 200uS (50%) uS
- Maximum Wattage
- 100 W
- Input voltage
- 230Vac
- Surge Protection L-N
- 6kV
- Surge Protection L/N-PE
- 6KV
- In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6%
Lamp
- Colour Rendering Index (CRI)
- >80
- LED Type
- Diffused
- CCT Configuration
- Single
- Macadam Steps (SDCM)
- 5-step MacAdam Ellipse
- Beam Angle
- 110 °
LED Lifetime
- LED Lifetime
- 60000 hrs
- LED Lifetime Rating
- L70 B10 (10K)
- TM-21 Test Hours
- 10000 hrs
- LED lifetime scope
- LED lifetime figures concern LED-component performance, not a guaranteed complete-fixture service life or the warranty period.
- Lifetime-rating terminology
- L describes remaining light output as a percentage of initial output; B describes the proportion of LEDs below that output criterion at the stated time and ambient temperature.
Colour temperature
- CCT Colour
- Daylight
- LED Wattage
- 100 W
- Luminaire Lumens
- 16000 lm
- CCT
- 5000 K
- Photometric tolerance
- The manufacturer states ±10% tolerance for photometric data; luminaire lumens are delivered output from the fitting.
Driver
- Driver Type
- Fixed output
- Driver Included
- Yes
- Integrated Driver
- No
- Flex & Plug or Lead Length
- 1500 mm
- Wiring Type
- Flying leads (3 wire)
- Driver Mode
- Constant Current
- Driver Current
- 500 mA
- Dimmable
- No
Compliance
- Standards
- AS/NZS 60598.1 | AS/NZS 60598.2.5 | AS/NZS 61347.1 | AS/NZS 61347.2.13 | AS CISPR 15 | IEC 62031 | IEC/TR 62778 | IEC 62471
- Daily Use
- 10 hours/day recommended for stated design life; longer use reduces design life proportionally
- The Daily Use is the recommended time required to meet the product's design life. Installations can exceed this time, however the product design life will be reduced proportionally.
Warranty
- Warranty
- 5 years from purchase for products purchased from 1 July 2026; first 2 years onsite in Australia where eligible, then return to base. Any expressly stated Warranty Operating Hours and Atom terms apply.
- Warranty conditions
- Onsite support requires eligible purchase and installation by an appropriately licensed electrician in Australia, and is subject to location, access, service-network availability and claim acceptance.
- The total warranty period is shown above. Where an on-site period is listed, the first years are covered on-site, with return-to-base coverage for the remainder. For full warranty details and claim instructions, please refer to our Warranty page.
Product configuration
- Product image scope
- Manufacturer images are illustrative; confirm the selected item number and supplied configuration before ordering.
- Fixture power
- Maximum rating: 100 W
- Light source
- LED
- Electrical class
- Class I
- Mounting fixings
- Not supplied; select fixings adequate to support the floodlight securely
- Safety-chain requirement
- Mounting above 3 m requires a safety chain
- Connection requirement
- Terminate the mains cable in an appropriately IP-rated junction box or equivalent
- Cable routing
- Provide at least 2 cm of cable drop below the gland so water drains away, per manufacturer guidance updated 18 August 2026
- Light-source / cord service
- Light source and damaged external flexible cord must only be replaced by the manufacturer, its service agent or a similarly qualified person
- Installation / cleaning
- Isolate mains before installation or servicing; do not jet-wash; aim the head and secure both clamping bolts
- Installation requirement
- Must be installed by a licensed electrician; isolate mains before installation or servicing
Dimensions & mounting
- Product Height
- 325 mm
- Product Length
- 241 mm
- Product Width
- 100 mm
Package & requirements
Included
- Driver
Not included / sold separately
- Not supplied; select fixings adequate to support the floodlight securely
Required separately
- Terminate the mains cable in an appropriately IP-rated junction box or equivalent
Installation & care
- Must be installed by a licensed electrician; isolate mains before installation or servicing
- Provide at least 2 cm of cable drop below the gland so water drains away, per manufacturer guidance updated 18 August 2026
- Mounting above 3 m requires a safety chain
- Isolate mains before installation or servicing; do not jet-wash; aim the head and secure both clamping bolts
- Light source and damaged external flexible cord must only be replaced by the manufacturer, its service agent or a similarly qualified person
Warranty
- 5 years from purchase for products purchased from 1 July 2026; first 2 years onsite in Australia where eligible, then return to base. Any expressly stated Warranty Operating Hours and Atom terms apply.
- Onsite support requires eligible purchase and installation by an appropriately licensed electrician in Australia, and is subject to location, access, service-network availability and claim acceptance.
Documents & supplier information
Shipping costs are calculated at checkout based on your delivery address, order weight and dimensions. Standard dispatch is 5 working days; delivery transit times begin after dispatch. For urgent orders or heavy and bulky items, contact our team before ordering.
Warranties
For all warranty claims, please ensure you have your proof of purchase and that the faulty product is within the applicable manufacturer's stated warranty period. Warranty is limited to replacement unless otherwise stated.
Under no circumstances will Ozlighting be liable for any electrical costs associated with a faulty product.
Please note that all electrical items that require installation must be done by a licensed electrician in accordance with Australian and New Zealand laws and regulations. If you are claiming a warranty on a particular item, we may ask you to provide evidence that it has been installed by a licensed electrician.
Goods damaged in Transit or Short Deliveries
Unfortunately, accidents do happen in transit and occasionally shipping errors can occur. If this is the case, please get in touch with us within 7 days of receiving your order at sales@ozlighting.com.au and we will begin to process rectifying the order for you right away.
Returns
If a product is no longer required or you've changed your mind, you have 30 days to return these goods to our warehouse.
All products returned must be in their original packaging and must not have been used. If the product box is damaged in any way this may affect the result of your return.
Returns will be processed as a store credit which is valid for up to 12 months from the date of issue to use on any of our products. If you would like to opt for a refund please note it will incur a 15% restocking fee.
The customer is responsible to arrange and pay for the return delivery.
For items that have been made to order or custom made or altered in any way, unfortunately we cannot accept these items back.
Please note:
Products may differ from those pictured on the website due to natural variations in colour and finish. Products that have been installed cannot be returned.
Procedure
To claim your warranty or return, please email us at sales@ozlighting.com.au with the following information:
- Your invoice or order number.
- The reason for the warranty or return.
- Any supporting evidence (such as photos) to support your claim
Liability
We exclude and are not liable for all liabilities, losses, damages, expenses and costs of any kind (including without limitation any indirect and consequential losses, such as commercial or economic loss of any kind, and/or expenses incurred for installation services) as a result of or in connection with your access and/or use of our website, and/or any of our acts or omissions (including negligence).
Governing Law
Any argument relating to the terms and conditions between Ozlighting and the customer shall be governed by the laws of New South Wales, Australia.
What Our Customers Say
Company and product reviews collected through REVIEWS.io.