Havit DEK - 3W LED Deck or Inground Light
DEK 3 W LED Deck or Inground Light
A compact recessed light with a 316 stainless steel face, aluminium body and built-in 3 W LED. Choose Black, Stainless Steel (the Silver option), or White, with 3000 K, 4000 K or 5500 K selected during installation.
Before you order
12 V DC driver required: this light needs a separately selected, suitable 12 V DC LED driver. Never connect the fitting directly to 240 V. A licensed electrician must install it.
Location and drainage: every finish has an aluminium body. Havit’s supplied installation instructions prohibit aluminium fittings within 5 km of any saltwater environment; apply this restriction to all three options. Inground installation requires adequate drainage and watertight connections.
What is included and what to plan for
The DEK fitting contains a built-in 3 W LED. There is no separate replacement globe to select for initial installation.
Select a suitable 12 V DC LED driver for the combined lighting load, leaving the 30% allowance from the driver’s maximum load required by Havit for deck and inground lights. The maximum run is 25 m from the driver to the last fitting.
Plan watertight connection materials, drainage and suitable cable with your electrician. Concrete installation requires the matching canister, installed flush with ground level. Havit shows a canister to suit but does not explicitly confirm its box inclusion in the checked product documents.
Specifications
- Exact models
- HV2893T-BLK-12V / HV2893T-SS316-12V / HV2893T-WHT-12V
- Input / LED
- 12 V DC / 1 × 3 W built-in LED
- Colour temperature
- 3000 K warm white / 4000 K neutral white / 5500 K cool white
- Light output by colour temperature
- 3000 K: 180 lm / 4000 K: 190 lm / 5500 K: 185 lm
- Beam angle / colour rendering
- 36° / CRI >80
- Dimming
- Dimmable with an appropriate dimmable 12 V DC LED driver and compatible control
- Protection
- IP67 / IK08 / Class III low-voltage fitting; no earth required at the fitting
- Construction
- 316 stainless steel face and aluminium body; Black and White have poly powder coated covers
- Diffuser / lens
- Plastic diffuser; manufacturer describes the DEK lens as traffic resistant
- Mounting / wiring
- Recessed deck or inground installation / parallel wiring
- Fitting cable
- 500 mm
- Manufacturer LED expectancy
- >30,000 hours under the manufacturer’s stated laboratory conditions; not an unconditional service-life guarantee
Dimensions and cutouts
Face diameter: 45 mm.
Total height including the bottom connection: 63 mm.
Body diameter: 35 mm.
Body height excluding the bottom connection: 50 mm.
38 mm diameter × 79 mm high. Install the canister flush with ground level when recessing into concrete. Canister height is separate from the light fitting’s height.
Without canister: 36 mm diameter.
With canister: 38 mm diameter.
Use the exact manufacturer diagram and allow the required drainage space below the canister.
Choose your finish
HV2893T-BLK-12V: poly powder coated black 316 stainless steel cover with an aluminium body.
HV2893T-SS316-12V: 316 stainless steel cover with an aluminium body. Regular stainless steel care is required.
HV2893T-WHT-12V: poly powder coated white 316 stainless steel cover with an aluminium body.
Installation essentials
- A qualified, licensed electrician must install the fitting in accordance with AS/NZS 3000, with mains power isolated. Use an appropriate 12 V DC LED driver and wire multiple fittings in parallel. Voltage at each fitting must remain within ±5% of 12 V DC.
- For deck or inground use, maintain the manufacturer’s 30% allowance from the driver’s maximum load and a maximum 25 m run from the driver to the last fitting. A non-Havit driver must provide short-circuit, overheating, overvoltage and overload protection for Havit’s warranty conditions to apply.
- Provide adequate drainage. Havit’s diagram shows 100 mm clear space below the canister and a 100–150 mm bed of crushed rock, with a slight surface decline so water runs away from the fitting. The canister must sit flush with ground level when installed in concrete.
- Colour temperature is selected through the wiring during installation. Unused colour-temperature conductors must be terminated to maintain IP protection. The manufacturer specifies joining the 3000 K and 5500 K neutral conductors for 4000 K; follow the exact wiring diagram.
- Make every cable join watertight with adhesive-lined heat shrink or gel caps, keep all O-rings and seals correctly seated, and apply silicone around the fitting edge as instructed to prevent water reaching electrical connections.
- Havit’s LED warranty conditions prohibit installation on the same circuit as fluorescent lighting, exhaust fans, bathroom three-in-one fittings, ovens or microwaves.
Dimming and optional accessories
For dimming, select a suitable dimmable 12 V DC LED driver. Havit lists the HV9625 TRIAC dimmer for use with TRIAC dimmable drivers, plus HV9911, HV9912 and HV9913 IP67 weatherproof connectors as optional compatible accessories. Driver and control selection must suit the installation; a non-dimmable driver does not provide dimming.
Care and manufacturer warranty
Havit specifies maintenance of the uncoated 316 stainless steel option every six months, or more frequently in coastal environments, and recommends its optional HV9971 maintenance kit. This care advice does not remove the aluminium-body location restriction above. Non-structural surface rust and tea staining on 316 stainless steel are excluded from the manufacturer warranty.
The fitting has a 3-year limited replacement warranty, subject to proof of purchase, licensed installation, correct power supply, drainage, sealing and Havit’s current terms. For the full three-year term, maximum use is 8 continuous hours followed by at least 1 hour of rest, and no more than 12 hours per day. Havit specifies 18 months for 8–12 continuous hours and 12 months for 12–24 continuous hours. Its products intended for domestic use have a 12-month warranty term when used commercially, unless otherwise designated.
Read Havit’s current warranty terms and conditions for the complete limitations and claim requirements.
Manufacturer documents
DEK datasheet and dimension diagrams · Exact-model installation and drainage instructions · 2026 manufacturer warranty PDF
Exact manufacturer product pages: Black · Stainless Steel · White
We currently ship our products to both Australia and New Zealand.
Dispatch Times
Not all products available for sale are held in our local warehouse.
Once your order is placed, we begin processing it immediately. Most items are ordered directly from our suppliers and delivered to our warehouse before being carefully packed and shipped out to you.
Most items will ship within 1 to 7 business days. If there are any delays we will endeavour to let you know as soon as possible.
Production Items and Made To Order Products can take up to 10 business days to produce, if this is the case, we will let you know as soon as possible.
Delivery Times
Delivery times will vary based on your location. Once we've dispatched your order, you can expect to receive it in the following time frames:
| NSW/ACT | 1-2 Business Days |
| VIC/QLD | 2-3 Business Days |
| SA/TAS | 4-5 Business Days |
| WA/NT | 7-10 Business Days |
| NZ | 10-15 Business Days |
* Please allow an additional 1-2 business days for regional areas and for orders placed on weekends and public holidays.
Whilst all care is taken to dispatch your order as soon as possible, we cannot control supplier turnarounds or courier delivery timeframes. As a result, it is advisable to not book your electrician for installation of your lights until they have physically arrived to your premises.
Express Shipping
If you would like to add Express Shipping onto your order please email our team at sales@ozlighting.com.au or call on 1300 858 360 and we will be able to assist you with your request.
*Please note additional costs apply for Express Shipping option.
Shipping Charges (Australia)
We now offer postage starting from $11.95 to Sydney and $15.95 to NSW Metro Areas, and Interstate Capital City Areas start from $17.95.
Postage to Interstate Metro Areas starts from $21.95 & $32.95 to Regional Areas of Australia.
Shipping is calculated upon checkout after you have added all your items to your cart.
Please note that postage varies in price based on delivery location and the total weight of the order. Lowest shipping prices are for orders with a total weight up to 5kg.
Orders over 10kg will be calculated by Australia Post at checkout.
Products over 105cm in length or bulky orders may attract an additional shipping charge in which case we will let you know as soon as possible. Delivery to certain remote areas of Australia may also attract an additional shipping charge in which case we will let you know as soon as possible.
Please refer to the table below beforehand to identify what the shipping rate is for your address.
| Delivery Location | Up to 5KG | 5KG-10KG |
|---|---|---|
| Sydney | $11.95 | $20.95 |
| NSW Metro Areas | $15.95 | $30.95 |
| NSW Regional Areas | $25.95 | $54.95 |
| Interstate Capitals | Up to 5KG | 5KG-10KG |
| Melbourne, Brisbane, Adelaide & Perth | $17.95 | $32.95 |
| Interstate Metro Areas | Up to 5KG | 5KG-10KG |
| Hobart, Victoria Metro, Queensland Metro, South Australia Metro & Western Australia Metro | $21.95 | $46.95 |
| Interstate Regional Areas | Up to 5KG | 5KG-10KG |
| Victoria Regional, Queensland Regional, Tasmania Regional, Northern Territory, South Australia Regional, Western Australia Regional & Other Areas | $31.95 | $74.95 |
| Postcodes | |
|---|---|
| NSW | |
| Sydney | 1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747-2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897 |
| NSW Metro Areas | 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775, 2778-2786, 2250-2263, 2500-2507, 2515-2532, 2282-2310, 200-299, 2600-2620, 2900-2920, 1936-1999, 2640-2641, 2708-2709, 2485-2486 |
| NSW Regional Areas | 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787-2879 |
| Postcodes | |
| Interstate Capitals | |
| Melbourne | 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999 |
| Brisbane | 4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725 |
| Adelaide | 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999 |
| Perth | 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992-6996 |
| Postcodes | |
| Interstate Metro Areas | |
| Hobart | 7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999 |
| Victoria Metro | 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983, 3211-3220, 3350, 3353-3356, 3689-3690 |
| Queensland Metro | 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549, 4300-4308, 4210-4224, 4226-4269, 9726-9919, 4225, 4550-4579 |
| South Australia Metro | 5114, 5118-5124, 5131-5157, 5170-5200 |
| Western Australia Metro | 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991, 6997-6999 |
| Postcodes | |
| Interstate Regional Areas | |
| Victoria Regional | 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925, 3945-3974, 3979, 3984-3999 |
| Queensland Regional | 4309-4453, 4580-4693, 4454-4499, 4694-4802, 4804-4805, 9920-9960, 4803, 4806-4999, 9961-9998 |
| South Australia Regional | 2880-2889, 5201-5749 |
| Western Australia Regional | 6215-6700, 6701-6797 |
| Tasmania Regional | 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799 |
| Northern Territory & Other Areas | 800-802, 804-821, 828-851, 853-853, 860-861, 870-871, 873-879, 906-999, 803-803, 822-827, 852-852, 854-859, 862-869, 872-872, 880-905, 2898-2899, 6798-6799, 7151-7154 |
Shipping Charges (New Zealand)
We offer a $49.99 flat shipping rate to our New Zealand customers.
Please note: products over 1.2M in length or bulky items may attract an additional shipping charge in which case we will let you know as soon as possible.
Please note: certain remote areas of New Zealand may attract an additional shipping charge in which case we will let you know as soon as possible.
Warranties
For all warranty claims, please ensure you have your proof of purchase and that the faulty product is within the applicable manufacturer's stated warranty period. Warranty is limited to replacement unless otherwise stated.
Under no circumstances will Ozlighting be liable for any electrical costs associated with a faulty product.
Please note that all electrical items that require installation must be done by a licensed electrician in accordance with Australian and New Zealand laws and regulations. If you are claiming a warranty on a particular item, we may ask you to provide evidence that it has been installed by a licensed electrician.
Goods damaged in Transit or Short Deliveries
Unfortunately, accidents do happen in transit and occasionally shipping errors can occur. If this is the case, please get in touch with us within 7 days of receiving your order at sales@ozlighting.com.au and we will begin to process rectifying the order for you right away.
Returns
If a product is no longer required or you've changed your mind, you have 30 days to return these goods to our warehouse.
All products returned must be in their original packaging and must not have been used. If the product box is damaged in any way this may affect the result of your return.
Returns will be processed as a store credit which is valid for up to 12 months from the date of issue to use on any of our products. If you would like to opt for a refund please note it will incur a 15% restocking fee.
The customer is responsible to arrange and pay for the return delivery.
For items that have been made to order or custom made or altered in any way, unfortunately we cannot accept these items back.
Please note:
Products may differ from those pictured on the website due to natural variations in colour and finish. Products that have been installed cannot be returned.
Procedure
To claim your warranty or return, please email us at sales@ozlighting.com.au with the following information:
- Your invoice or order number.
- The reason for the warranty or return.
- Any supporting evidence (such as photos) to support your claim
Liability
We exclude and are not liable for all liabilities, losses, damages, expenses and costs of any kind (including without limitation any indirect and consequential losses, such as commercial or economic loss of any kind, and/or expenses incurred for installation services) as a result of or in connection with your access and/or use of our website, and/or any of our acts or omissions (including negligence).
Governing Law
Any argument relating to the terms and conditions between Ozlighting and the customer shall be governed by the laws of New South Wales, Australia.