- Product image scope
- Manufacturer images are illustrative; confirm the selected item number and supplied configuration before ordering.
- Fixture power
- Maximum rating: 24 W
- Light source
- LED
- Colour temperature
- 3000 / 4000 / 5700 K, selectable
- Sensor
- Built-in microwave motion sensor
- Electrical class
- Class I
- Input frequency
- 50 Hz
- Working temperature
- −20 to 40 °C — exact sensor installation guide
- Beam angle
- 120° — exact sensor installation guide
- External dimming
- Not dimmable; the separate 10%/30% setting is internal sensor standby dimming
- Sensor frequency
- 5.8 GHz microwave
- Sensor mounting height
- 2.5–6 m
- Sensor detection diameter
- 8 m
- Sensor detection-area settings
- 50% / 100%
- Sensor daylight settings
- 2 / 10 / 50 lux / disabled
- Sensor hold time
- 5 seconds / 30 seconds / 1 minute / 5 minutes
- Sensor standby period
- Always off / 30 seconds / 5 minutes / always on
- Sensor standby dimming
- 10% / 30%
- Sensor setup
- Set the sensor DIP switches with mains power off; hold time is the period at 100% output after no motion is detected, followed by the selected standby period/level
- Installation requirement
- Qualified electrician installation; indoor use only; do not mount outdoors or on damp/newly plastered ceilings; maintain adequate ventilation around the driver
- Light-source service
- Only the manufacturer, its service agent or a similarly qualified person may replace the light source
- Dimmable
- No
- Sensor daylight-output source conflict
- At 24 W and 5700 K the native page/current datasheet gives 2370 lm; the exact sensor guide gives 2330 lm. Confirm before purchase.
- Selectable-power source conflict
- The exact current datasheet lists 18/20/24 W; the exact 24 W sensor guide switch drawing instead shows 10/12/14 W. Confirm the supplied selector settings.