Flicker-free dimming through the specified compatible control system.








Ektor UMBRA-PRO-WP-EM/S/LK LED Batten Light - 20W/33W, 600mm, 1200mm, 2FT, 4FT, Tunable, CCT, DALI, IP65, Weatherproof, Emergency

UMBRA PRO WP EM/S/LK
UMBRA PRO WP EM/S/LK — select the exact option below.
Important before you buy
- Arrange installation by a licensed electrician. The exact mounting and electrical connection for each available option are listed below.
- DALI dimming, tuning or monitored functions require a compatible DALI control system separately; standalone operation is available only where specified for the selected model.
- Networked Lynk monitoring requires the compatible gateway and monitoring system separately. Select a Lynk option for wireless operation; other options do not provide Lynk wireless connectivity.
IP Rating
IP65
IK Rating
IK08
Input voltage
230Vac
Maximum Wattage
20 W / 33 W
Key features
IP65 / IK08 construction.
12-year product design life at the maximum stated ambient temperature.
Soft-start battery charging reduces the initial load on the electrical supply.
LiFePO4 battery and smart charger for emergency operation.
DT51 power monitoring reports active power and energy consumption to a compatible system.
Technical specifications
Shared across the listed options
Mechanical
- IP Rating
- IP65
- IK Rating
- IK08
- Fitting Colour
- Grey
- Body Material
- Polycarbonate
- Diffuser Material
- Polycarbonate
- Installation Type
- Surface mount
Electrical
- Working Temp Range
- 0 to 40 °C
- Input Frequency
- 50 Hz
- Switch Type
- Inbuilt Mains Rated DALI Switch
- Power Factor
- 0.95
- Input voltage
- 230Vac
- Standby Power
- 0.3 W
Lamp
- Colour Rendering Index (CRI)
- >84
- CCT Configuration
- Single
- Macadam Steps (SDCM)
- 3-step MacAdam Ellipse
LED Lifetime
- LED Lifetime
- >102000 hrs
- LED Lifetime Ratings (Failure rate & lumen depreciation)
- Ambient Temp (°C): 25 °C: 40 °C; L90B10: 55000 hrs: 55000 hrs
- TM-21 Test Hours
- 17000 hrs
Colour temperature
- CCT
- 4000 K
Driver
- Driver Included
- Yes
- Integrated Driver
- No
- Dimmable
- Yes
- Wiring Type
- Re-wireable terminal block (6 pin)
- Driver Mode
- Constant Current
- Power Monitoring
- DALI Device type 51 power monitoring
- PSTLM
- 0.08
- SVM
- 0.018
Emergency (EM suffix)
- Emergency Mode
- Maintained
- Emergency Duration
- 90 mins
Additional verified features
- Emergency battery chemistry
- LiFePO4
Further shared features
- Built-in DALI-2 switch supports standalone control or a compatible DALI-2 control system.
EK-12089 · 600mm / Without Sensor / DALI
EV-UMBRA-PRO-IP65-600-EM
Efficiencies
- Total System Efficiency
- 120 lm/W
Electrical
- Maximum Wattage
- 20 W
- System Max Wattage
- 20 W
Lamp
- Lamp/LED voltage
- 24 V
- Lamp/LED Current
- 650 mA
Colour temperature
- Luminaire Lumens
- 2400 lm
Driver
- Driver Type
- DALI DT6 LED Driver
- Driver Current
- 650 mA
Emergency (EM suffix)
- Emergency Classification
- C0:D40, C90:D32
- Emergency Output Power
- 1900 mW
- Replacement Battery Code
- 01302
- Emergency Lumen Output
- 350 lm
- Emergency Control
- DALI Monitored (DT1)
Compliance
- Standards
- AS/NZS 60598.1 AS 60598.2.22 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 AS/NZS 2293.3 IEC 62386-102 IEC 62386-103
Additional verified features
- Product design life
- 12 years at maximum ambient temperature
Features for this option
- Supports the DALI control or emergency monitoring functions specified for this model.
EK-12611 · 600mm / Without Sensor / DALI / Wireless
EV-UMBRA-PRO-IP65-600-EM-LK
Efficiencies
- Total System Efficiency
- 120 lm/W
Electrical
- Maximum Wattage
- 20 W
- System Max Wattage
- 20 W
Lamp
- Lamp/LED voltage
- 24 V
- Lamp/LED Current
- 650 mA
Colour temperature
- Luminaire Lumens
- 2400 lm
Driver
- Driver Type
- Wireless (IEC62386-104) with DT6
- Driver Current
- 650 mA
Emergency (EM suffix)
- Emergency Classification
- C0:D50, C90:D32
- Emergency Output Power
- 1900 mW
- Replacement Battery Code
- 01302
- Emergency Lumen Output
- 350 lm
- Emergency Control
- IEC62386-104 (Wireless DT1)
Compliance
- Product Design Life
- 12 years
- Standards
- AS/NZS 60598.1 AS 60598.2.22 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 AS/NZS 2293.3 AS/NZS 4268 IEC 62386-102 IEC 62386-103 IEC 62386-104
Features for this option
- Lynk wireless lighting control and emergency monitoring through a compatible system.
EK-12091 · 600mm / With Sensor / DALI
EV-UMBRA-PRO-IP65-600-EM-S
Efficiencies
- Total System Efficiency
- 120 lm/W
Electrical
- Maximum Wattage
- 20 W
- System Max Wattage
- 20 W
Lamp
- Lamp/LED voltage
- 24 V
- Lamp/LED Current
- 650 mA
Colour temperature
- Luminaire Lumens
- 2400 lm
Driver
- Driver Type
- DALI DT6 LED Driver
- Driver Current
- 650 mA
Sensor (S suffix)
- Sensor Type
- Microwave
- Detection Range [1]
- 10 m
- Time Delay
- Via DALI
- Switched Output
- No
- Corridor Function [1]
- Yes
- Lux Adjustment [1]
- No
- Manual Override [1]
- Yes
- Dawn Reset [1]
- No
- Dusk Mode [1]
- No
- Adjustable Hold Time [1]
- Yes
- Adjustable Standby Level [1]
- Yes
- Adjustable Standby Period [1]
- Yes
- Adjustable Detection Area / Sensitivity [1]
- Yes
- Sensor Communication [1]
- DALI 2
Emergency (EM suffix)
- Emergency Classification
- C0:D40, C90:D32
- Emergency Output Power
- 1900 mW
- Replacement Battery Code
- 01302
- Emergency Lumen Output
- 350 lm
- Emergency Control
- DALI Monitored (DT1)
Compliance
- Standards
- AS/NZS 60598.1 AS 60598.2.22 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 AS/NZS 2293.3 AS/NZS 4268 IEC 62386-102 IEC 62386-103
Additional verified features
- Product design life
- 12 years at maximum ambient temperature
Features for this option
- DALI-2 microwave occupancy sensing to IEC 62386-303.
- Supports the DALI control or emergency monitoring functions specified for this model.
- Corridor mode provides the stated sensor control during standalone operation.
EK-12613 · 600mm / With Sensor / DALI / Wireless
EV-UMBRA-PRO-IP65-600-EM-S-LK
Efficiencies
- Total System Efficiency
- 120 lm/W
Electrical
- Maximum Wattage
- 20 W
- System Max Wattage
- 20 W
Lamp
- Lamp/LED voltage
- 24 V
- Lamp/LED Current
- 650 mA
Colour temperature
- Luminaire Lumens
- 2400 lm
Driver
- Driver Type
- Wireless (IEC62386-104) with DT6
- Driver Current
- 650 mA
Sensor (S suffix)
- Sensor Type
- Microwave
- Detection Range [1]
- 10 m
- Time Delay
- Via DALI
- Switched Output
- No
- Corridor Function [1]
- Yes
- Lux Adjustment [1]
- No
- Manual Override [1]
- Yes
- Dawn Reset [1]
- No
- Dusk Mode [1]
- No
- Adjustable Hold Time [1]
- Yes
- Adjustable Standby Level [1]
- Yes
- Adjustable Standby Period [1]
- Yes
- Adjustable Detection Area / Sensitivity [1]
- Yes
- Sensor Communication [1]
- DALI 2
Emergency (EM suffix)
- Emergency Classification
- C0:D50, C90:D32
- Emergency Output Power
- 1900 mW
- Replacement Battery Code
- 01302
- Emergency Lumen Output
- 350 lm
- Emergency Control
- IEC62386-104 (Wireless DT1)
Compliance
- Product Design Life
- 12 years
- Standards
- AS/NZS 60598.1 AS 60598.2.22 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 AS/NZS 2293.3 AS/NZS 4268 IEC 62386-102 IEC 62386-103 IEC 62386-104
Features for this option
- DALI-2 microwave occupancy sensing to IEC 62386-303.
- Corridor mode provides the stated sensor control during standalone operation.
- Lynk wireless lighting control and emergency monitoring through a compatible system.
EK-12093 · 1200mm / Without Sensor / DALI
EV-UMBRA-PRO-IP65-1200-EM
Efficiencies
- Total System Efficiency
- 137 lm/W
Electrical
- Maximum Wattage
- 33 W
- System Max Wattage
- 30 W
Lamp
- Lamp/LED voltage
- 36 V
- Lamp/LED Current
- 850 mA
Colour temperature
- Luminaire Lumens
- 4100 lm
Driver
- Driver Type
- DALI DT6 LED Driver
- Driver Current
- 850 mA
Emergency (EM suffix)
- Emergency Classification
- C0:D100, C90:D63
- Replacement Battery Code
- 01303
- Emergency Lumen Output
- 700 lm
- Emergency Control
- DALI Monitored (DT1)
Compliance
- Product Design Life
- 12 years
- Standards
- AS/NZS 60598.1 AS 60598.2.22 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 AS/NZS 2293.3 IEC 62386-102 IEC 62386-103
Features for this option
- Supports the DALI control or emergency monitoring functions specified for this model.
EK-12615 · 1200mm / Without Sensor / DALI / Wireless
EV-UMBRA-PRO-IP65-1200-EM-LK
Efficiencies
- Total System Efficiency
- 137 lm/W
Electrical
- Maximum Wattage
- 33 W
- System Max Wattage
- 30 W
Lamp
- Lamp/LED voltage
- 36 V
- Lamp/LED Current
- 850 mA
Colour temperature
- Luminaire Lumens
- 4100 lm
Driver
- Driver Type
- Wireless (IEC62386-104) with DT6
- Driver Current
- 850 mA
Emergency (EM suffix)
- Emergency Classification
- C0:D100, C90:D63
- Emergency Output Power
- 3900 mW
- Replacement Battery Code
- 01303
- Emergency Lumen Output
- 700 lm
- Emergency Control
- IEC62386-104 (Wireless DT1)
Compliance
- Standards
- AS/NZS 60598.1 AS 60598.2.22 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 AS/NZS 2293.3 AS/NZS 4268 IEC 62386-102 IEC 62386-103 IEC 62386-104
Additional verified features
- Product design life
- 12 years at maximum ambient temperature
Features for this option
- Lynk wireless lighting control and emergency monitoring through a compatible system.
EK-12095 · 1200mm / With Sensor / DALI
EV-UMBRA-PRO-IP65-1200-EM-S
Efficiencies
- Total System Efficiency
- 137 lm/W
Electrical
- Maximum Wattage
- 33 W
- System Max Wattage
- 30 W
Lamp
- Lamp/LED voltage
- 36 V
- Lamp/LED Current
- 850 mA
Colour temperature
- Luminaire Lumens
- 4100 lm
Driver
- Driver Type
- DALI DT6 LED Driver
- Driver Current
- 850 mA
Sensor (S suffix)
- Sensor Type
- Microwave
- Detection Range [1]
- 10 m
- Time Delay
- Via DALI
- Switched Output
- No
- Corridor Function [1]
- Yes
- Lux Adjustment [1]
- No
- Manual Override [1]
- Yes
- Dawn Reset [1]
- No
- Dusk Mode [1]
- No
- Adjustable Hold Time [1]
- Yes
- Adjustable Standby Level [1]
- Yes
- Adjustable Standby Period [1]
- Yes
- Adjustable Detection Area / Sensitivity [1]
- Yes
- Sensor Communication [1]
- DALI 2
Emergency (EM suffix)
- Emergency Classification
- C0:D100, C90:D63
- Emergency Output Power
- 3900 mW
- Replacement Battery Code
- 01303
- Emergency Lumen Output
- 700 lm
- Emergency Control
- DALI Monitored (DT1)
Compliance
- Standards
- AS/NZS 60598.1 AS 60598.2.22 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 AS/NZS 2293.3 AS/NZS 4268 IEC 62386-102 IEC 62386-103
Additional verified features
- Product design life
- 12 years at maximum ambient temperature
Features for this option
- DALI-2 microwave occupancy sensing to IEC 62386-303.
- Supports the DALI control or emergency monitoring functions specified for this model.
- Corridor mode provides the stated sensor control during standalone operation.
EK-12617 · 1200mm / With Sensor / DALI / Wireless
EV-UMBRA-PRO-IP65-1200-EM-S-LK
Efficiencies
- Total System Efficiency
- 137 lm/W
Electrical
- Maximum Wattage
- 33 W
- System Max Wattage
- 30 W
Lamp
- Lamp/LED voltage
- 36 V
- Lamp/LED Current
- 850 mA
Colour temperature
- Luminaire Lumens
- 4100 lm
Driver
- Driver Type
- Wireless (IEC62386-104) with DT6
- Driver Current
- 850 mA
Sensor (S suffix)
- Sensor Type
- Microwave
- Detection Range [1]
- 10 m
- Time Delay
- Via DALI
- Switched Output
- No
- Corridor Function [1]
- Yes
- Lux Adjustment [1]
- No
- Manual Override [1]
- Yes
- Dawn Reset [1]
- No
- Dusk Mode [1]
- No
- Adjustable Hold Time [1]
- Yes
- Adjustable Standby Level [1]
- Yes
- Adjustable Standby Period [1]
- Yes
- Adjustable Detection Area / Sensitivity [1]
- Yes
- Sensor Communication [1]
- DALI 2
Emergency (EM suffix)
- Emergency Classification
- C0:D100, C90:D63
- Emergency Output Power
- 3900 mW
- Replacement Battery Code
- 01303
- Emergency Lumen Output
- 700 lm
- Emergency Control
- IEC62386-104 (Wireless DT1)
Compliance
- Product Design Life
- 12 years
- Standards
- AS/NZS 60598.1 AS 60598.2.22 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 AS/NZS 2293.3 AS/NZS 4268 IEC 62386-102 IEC 62386-103 IEC 62386-104
Features for this option
- DALI-2 microwave occupancy sensing to IEC 62386-303.
- Corridor mode provides the stated sensor control during standalone operation.
- Lynk wireless lighting control and emergency monitoring through a compatible system.
Dimensions
EK-12089
- Product Height
- 93 mm
- Product Length
- 650 mm
- Product Width
- 130 mm
EK-12611
- Product Height
- 93 mm
- Product Length
- 650 mm
- Product Width
- 130 mm
EK-12091
- Product Height
- 93 mm
- Product Length
- 650 mm
- Product Width
- 130 mm
EK-12613
- Product Height
- 93 mm
- Product Length
- 650 mm
- Product Width
- 130 mm
EK-12093
- Product Height
- 93 mm
- Product Length
- 1260 mm
- Product Width
- 130 mm
EK-12615
- Product Height
- 93 mm
- Product Length
- 1260 mm
- Product Width
- 130 mm
EK-12095
- Product Height
- 93 mm
- Product Length
- 1260 mm
- Product Width
- 130 mm
EK-12617
- Product Height
- 93 mm
- Product Length
- 1260 mm
- Product Width
- 130 mm
Inclusions & required separately
- EK-12089: LED driver included.
- EK-12089: emergency battery / charging system included for this emergency option.
- EK-12611: LED driver included.
- EK-12611: emergency battery / charging system included for this emergency option.
- EK-12091: LED driver included.
- EK-12091: emergency battery / charging system included for this emergency option.
- EK-12613: LED driver included.
- EK-12613: emergency battery / charging system included for this emergency option.
- EK-12093: LED driver included.
- EK-12093: emergency battery / charging system included for this emergency option.
- EK-12615: LED driver included.
- EK-12615: emergency battery / charging system included for this emergency option.
- EK-12095: LED driver included.
- EK-12095: emergency battery / charging system included for this emergency option.
- EK-12617: LED driver included.
- EK-12617: emergency battery / charging system included for this emergency option.
- EK-12089: Emergency LiFePO4 battery and smart charger.
- EK-12611: Emergency LiFePO4 battery and smart charger.
- EK-12091: Emergency LiFePO4 battery and smart charger.
- EK-12613: Emergency LiFePO4 battery and smart charger.
- EK-12093: Emergency LiFePO4 battery and smart charger.
- EK-12615: Emergency LiFePO4 battery and smart charger.
- EK-12095: Emergency LiFePO4 battery and smart charger.
- EK-12617: Emergency LiFePO4 battery and smart charger.
Installation & maintenance
- Follow the supplied manufacturer instructions for commissioning, charging, emergency testing and maintenance. Use the listed replacement battery code for the exact option.
Warranty
EK-12611
- Warranty
- 5 Year Warranty, First 2 Years Onsite
- Commercial Use Warranty
- 5Y return to base on General lighting components; 8Y return to base on Emergency lighting components; First 2Y includes an exclusive onsite warranty
- Warranty Operating Hours
- 30000 hrs
- Coverage limit
- Stated period or 30000 hrs, whichever occurs first
EK-12613
- Warranty
- 5 Year Warranty, First 2 Years Onsite
- Commercial Use Warranty
- 5Y return to base on General lighting components; 8Y return to base on Emergency lighting components; First 2Y includes an exclusive onsite warranty
- Warranty Operating Hours
- 30000 hrs
- Coverage limit
- Stated period or 30000 hrs, whichever occurs first
EK-12093
- Warranty
- 5 Year Warranty, First 2 Years Onsite
- Commercial Use Warranty
- 5Y return to base on General lighting components; 8Y return to base on Emergency lighting components; First 2Y includes an exclusive onsite warranty
- Warranty Operating Hours
- 30000 hrs
- Coverage limit
- Stated period or 30000 hrs, whichever occurs first
EK-12617
- Warranty
- 5 Year Warranty, First 2 Years Onsite
- Commercial Use Warranty
- 5Y return to base on General lighting components; 8Y return to base on Emergency lighting components; First 2Y includes an exclusive onsite warranty
- Warranty Operating Hours
- 30000 hrs
- Coverage limit
- Stated period or 30000 hrs, whichever occurs first
Subject to the manufacturer’s warranty conditions and stated operating limits. Any stated on-site service is subject to Australian installation, eligibility and service availability.
Shipping costs are calculated at checkout based on your delivery address, order weight and dimensions. Standard dispatch is 5 working days; delivery transit times begin after dispatch. For urgent orders or heavy and bulky items, contact our team before ordering.
Warranties
For all warranty claims, please ensure you have your proof of purchase and that the faulty product is within the applicable manufacturer's stated warranty period. Warranty is limited to replacement unless otherwise stated.
Under no circumstances will Ozlighting be liable for any electrical costs associated with a faulty product.
Please note that all electrical items that require installation must be done by a licensed electrician in accordance with Australian and New Zealand laws and regulations. If you are claiming a warranty on a particular item, we may ask you to provide evidence that it has been installed by a licensed electrician.
Goods damaged in Transit or Short Deliveries
Unfortunately, accidents do happen in transit and occasionally shipping errors can occur. If this is the case, please get in touch with us within 7 days of receiving your order at sales@ozlighting.com.au and we will begin to process rectifying the order for you right away.
Returns
If a product is no longer required or you've changed your mind, you have 30 days to return these goods to our warehouse.
All products returned must be in their original packaging and must not have been used. If the product box is damaged in any way this may affect the result of your return.
Returns will be processed as a store credit which is valid for up to 12 months from the date of issue to use on any of our products. If you would like to opt for a refund please note it will incur a 15% restocking fee.
The customer is responsible to arrange and pay for the return delivery.
For items that have been made to order or custom made or altered in any way, unfortunately we cannot accept these items back.
Please note:
Products may differ from those pictured on the website due to natural variations in colour and finish. Products that have been installed cannot be returned.
Procedure
To claim your warranty or return, please email us at sales@ozlighting.com.au with the following information:
- Your invoice or order number.
- The reason for the warranty or return.
- Any supporting evidence (such as photos) to support your claim
Liability
We exclude and are not liable for all liabilities, losses, damages, expenses and costs of any kind (including without limitation any indirect and consequential losses, such as commercial or economic loss of any kind, and/or expenses incurred for installation services) as a result of or in connection with your access and/or use of our website, and/or any of our acts or omissions (including negligence).
Governing Law
Any argument relating to the terms and conditions between Ozlighting and the customer shall be governed by the laws of New South Wales, Australia.

What Our Customers Say
Company and product reviews collected through REVIEWS.io.

