
Fanco Infinity-iD DC Ceiling Fan - CCT LED Light, White with Beechwood Blades 60 inch
Overview
Fanco Infinity-iD DC Ceiling Fan - CCT LED Light, White with Beechwood Blades 60 inch
The Fanco Infinity-iD 60-inch DC ceiling fan combines ABS plastic blades with a six-speed remote control. The included LED offers selectable colour temperatures and dimming.
- Motor
- DC
- Speeds
- 6
- Maximum airflow
- 14,958 m³/h
Features
Fine control at low speed
Six speeds include a 60 RPM first setting for gentle circulation. Use the included no-beep 433 MHz remote to select your setting.
Summer and winter modes
Reversible operation lets you change the fan direction for the season. The timer offers 1, 4 or 8 hours.
ABS blades, architectural finish
Three ABS plastic blades in white with beechwood blades suit the understated Scandinavian-inspired design.
Add app control when needed
The optional F9990/000A SMART module enables app and remote control in tandem. It is sold separately and fits into the receiver before installation.
Light that adapts
Select 3000K, 4000K or 5000K and use stepless dimming. CCT and brightness settings are retained when switched off and back on.
Replace the panel, keep the fan
The FCSP13-CT002 plug-in LED panel is user replaceable without an electrician. Use only a Fanco-certified replacement panel.
Specifications
- Model
- Infinity-iD DC
- Motor
- DC
- Rated voltage
- 220–240 V AC
- Electrical supply
- 230 V AC, 50 Hz
- Finish
- White with Beechwood blades
- Blades
- 3 × ABS plastic
- Blade pitch
- Approximately 14°
- Location
- Indoor, sheltered covered outdoor and coastal
- Ceiling angle
- 0–10°
- Speeds
- 6
- Remote frequency
- 433 MHz
- Timer
- 1, 4 or 8 hours
- Reversible
- Yes
- Motor input at speed 6
- 39 W
- Rated motor consumption
- 40 W
- Maximum speed
- 180 RPM
- Maximum airflow
- 14,958 m³/h
- LED power
- 20 W
- Colour temperatures
- 3000K / 4000K / 5000K
- Light output at 3000K
- 1309 lm
- Light output at 4000K
- 1495 lm
- Light output at 5000K
- 1608 lm
- Dimming
- Stepless, via supplied control
- Light memory
- CCT and brightness
- Replacement LED panel
- FCSP13-CT002, Fanco-certified
Airflow and motor performance
| Speed | Power (W) | RPM | Airflow (m³/h) |
|---|---|---|---|
| 1 | 2 | 60 | 5,834 |
| 2 | 4 | 85 | 8,086 |
| 3 | 8 | 110 | 9,735 |
| 4 | 14 | 130 | 10,914 |
| 5 | 24 | 155 | 12,941 |
| 6 | 39 | 180 | 14,958 |
Dimensions
- Fan diameter
- 1520 mm / 60 inches
- Ceiling to lowest blade
- 270 mm
- Canopy diameter shown
- 172 mm
- Ceiling to lowest light
- 291 mm
Published dimensions are from the Fanco model datasheet. Have your installer confirm the assembled drop, rod selection and required clearances for your ceiling.
Options
- Model / components
- F8061/100C + F8061/021C
- Optional F9990/000A SMART module — sold separately.
- Matching white extension rods: K701M/106A (600 mm), K701M/109A (900 mm), K701M/115A (1500 mm). Extension accessories are sold separately; the installation manual specifies Type A rod orientation.
- Replacement FCSP13-CT002 LED panel — purchased separately when replacement is required.
Inclusions
- Fan motor assembly, mounting bracket and supplied rod.
- Three ABS plastic blades.
- Remote and receiver pack.
- Assembly hardware and blade balancing kit.
- CCT LED panel and light diffuser.
Sold separately / arrange separately
- Licensed electrical installation.
- Optional SMART module and extension rod accessories.
- Suitable additional fixing screws for mounting surfaces other than timber joists, where required.
Installation requirements
- Installation by a licensed electrician is required; allow for the installation service separately. Use the supplied remote and receiver. Do not connect the fan motor to a dimmer switch.
- For covered outdoor use, install in an enclosed, sheltered area with at least 1.5 m from the blade tips to roof/eave edges or unprotected points. Fully protect the fan from wind, rain and direct sunlight.
- The F9990/000A SMART module is optional and sold separately. App control requires this module; the standard remote is included.
- Maintain at least 2.1 m from blades to floor and 300 mm from blade tips to walls or obstructions. The mounting structure must support at least 45 kg.
- Maximum operating temperature: 40°C. Keep away from heat sources.
- Switch the fan off and allow it to stop before reversing. Check support connections, brackets and blade attachments twice a year.
- Disconnect the electricity before cleaning. Clean approximately every six months with a soft brush or lint-free cloth; do not use water. Follow the official installation manual for all installation, operating and care instructions.
Warranty
8-year motor warranty: 2 years in-home cover plus 6 years motor replacement, subject to Fanco’s warranty conditions. Register the fan within 90 days of purchase to qualify for the extended motor warranty.
Remote handsets and light parts supplied with the fan have a 1-year replacement warranty; remote receivers have a 2-year replacement warranty. Keep proof of purchase and licensed installation. Refer to the model-specific warranty statement for conditions and exclusions.
Documentation

What Our Customers Say
Company and product reviews collected through REVIEWS.io.






