
Domus CHAM-DR-1C - Single Colour LED 1 Channel Expandable Data Signal Repeater
Overview
Domus CHAM-DR-1C - Single Colour LED 1 Channel Expandable Data Signal Repeater
Ledstrip
The CHAM-DR-1C is a 1 channel high power data repeater.
Features
The CHAM-DR-1C offers the ability to expand the signal strength generated by the master controller for dimming circuits. In situations where the load limit is exceeded or more that the limit set by the Master controller the CHAM-DR-1C is able to duplicate the signal without signal loss. This means whether dimming via RF, 0-10V, DALI or DMX you can be assured that the dimming signal will always be stable thus avoiding the appearance of dim light over larger areas. Particularly useful where a single master controller is used to control large areas or multiple zones.
Power Supply: 12V/24V DC Constant Voltage LED Driver
4-In-1 Universal 5 Channel Master Colour Controller: CHAM-BT-RF-5C
Remote Control: CHAM-REM-1C
Touch Wall Control: CHAM-TOUCH-1C
Variant: 20134 - Single Colour LED Data Repeater - 1 Channel (previously known as CHAM-25), used for expandable signal requirements.
* Accepts signal generated from a Master controller. The signal output from the Master controller must be a PWM type output. ** Multiple 1CH data repeaters can be used in a single circuit.
Protection: Yes, replaceable external 25A blade fuse***
Specifications
- Input Voltage (VDC)
- 12-24V DC
- Output Voltage (VDC)
- 12-24V DC
- Output Current (A)
- 1x24A
- Output Wattage (W)
- 12V DC - 288W per channel (x1)
- Output Wattage (W)
- 24V DC - 576W per channel (x1)
- Type of Controller
- 1CH High Power Data repeater
- Method of Control
- PWM
- Method of Dimming
- PWM (Pulse width modulation)
- Housing Colour
- Black plastic colour housing
- Expandable signal
- Yes
- Housing size (mm)
- (L) 150mm x (W) 54mm x (H) 31mm
Options
DL-20134
Installation requirements
Requires a separate constant-voltage LED driver matched to the 12–24V DC lighting load. Match the controller/interface, channel count and control signal to the connected LED system.
Requires: 12-24V DC Constant Voltage LED Driver****
*** Standard replacement blade type fuse. Available from any electronics supplier. **** Constant Voltage LED driver required (not included) product dependant.
Documentation

What Our Customers Say
Company and product reviews collected through REVIEWS.io.


