Need Expert Advice?

Mon - Fri 9am - 5pm

1300 858 360

Ceiling Fan Buying Guide

We've compiled some information below to assist you in selecting a Ceiling Fan for your home. 

 

Fact: Ceiling Fans can be used in BOTH Summer and Winter
Ceiling fans are great for circulating the air in a room. Although they don’t actually cool the room down, in the summer ceiling fans will create a cool breeze by spinning in a forward direction (counter clockwise) and will make your feel considerably more comfortable indoors and outdoors. However, please remember that ceiling fans cool people - they don't cool rooms, therefore, consider turning off your ceiling fan when no one is in the room to conserve energy.

 

With most fans, you can set the blades to rotate in reverse (Clockwise) in winter. This will force the warm air that is trapped at the ceiling, down into the room to mix with the cool air. This will warm up your room in winter. For best effect in winter, keep your fan on low speed.

 

TIP: Check to make sure that the Ceiling Fan you’re buying comes with a reversible motor that allows you change between the summer and winter option.


TIP: You can also use the reversible modes of a Ceiling Fan to disperse the air according to your needs. Clockwise spinning will generate a breeze directly under the ceiling fan where as Counter-Clockwise spinning will disperse the breeze to the edges of the room


 

Ceiling Fans Create a Cool Breeze in Summer  In Winter, Ceiling Fans will assist to warm the room

 

Efficiency
The efficiency of a ceiling fan, especially in a warm climate like Australia, can have a large influence on the electric bill. You can save a lot of money and enjoy increased performance from your ceiling fan by choosing an energy efficient ceiling fan. Efficiency in ceiling fans is measured by the amount of airflow generated per wattage of Power consumed. This is measured in (m3/h)/W (cubic metres per hour per Watt). Below are the results of testing done by Hunter Pacific to compare the efficiency of some common Australian Ceiling Fans:

 

Compare the Efficiency of some Common Ceiling Fans

 

 

How to choose the best ceiling fan for your home

Correct size
Choosing the correct ceiling fan size for your room is important to get maximum comfort and energy savings. If the fan is too small for your room it will not circulate enough air and it will be ineffective in summer and winter. If the fan is too big for the room it could overpower the room making it uncomfortable. You can change the size of your ceiling fan by changing the size of the blades.
 

Room Dimensions

Suggested Fan Size

Up to 7 m2

29 – 36”

7 – 13 m2

36 – 42”

13 – 21 m2

44”

21 – 37 m2

50 – 54”

 

Motor
There are higher and lower powered motors. Higher powered motors will produce more airflow and they won’t overheat as easily as fans that have lower powered motors. If you choose a motor that has sealed bearings you never need to oil it and noise won’t be a problem. Another good option is a rubber flywheel, which keeps torque under control. With a rubber flywheel, the fan is stabilised and the level of noise is reduced.

 

Blades
A ceiling fan has two to six blades, which are usually made of wood, metal or plastic. The major differences between the blades is the angle that they are pitched at, the material they are constructed from and the shape of the blade. The blade pitch of a fan is the angle of the blades relative to the fan. It is measured in degrees. If a blade perfectly parallel to the floor (pitch 0 degrees) it won’t produce a strong airflow. Therefore the higher a blade pitch the more air the fan moves, however this needs to be considered with all of the variables together. For an optimal airflow the blade should be pitched between 12 and 22 degrees.

 

The standard number of blades is four. In general you can say the more blades a ceiling fan has the more air can be circulated, up to a certain point. Then more blades increase the drag of the motor and the price of the fan. But the number of the blades is not as important as most customers think. The efficiency of a ceiling fan also depends on the strength/quality of the motor, the pitch of the blade and the right blade size.

 

In general you can say that metal blades are more efficient than wooden ones but they are produce slightly more noise.

You should also consider the mounting location when deciding on the most appropriate blades. There are some places in your home where ceiling fans are exposed to moisture like in a kitchen or in a bathroom therefore metal corrosion or a reduced blade life could be a problem. For these areas you should choose blades that have a rust proof finish and blades that do not warp easily like plastic or stainless steel blades.

 

TIP: Consider whether noise will be an issue for you when running your ceiling fan; choose wooden blades for decreased operational noise.

 

 

TIP: Consider the mounting location when selecting your blade type; Plastic or stainless steel blades will perform better in moist conditions

 



Outdoor Ceiling Fans
Outdoor ceiling fans are usually installed at a porch area. They are therefore exposed to extreme temperature changes and moisture for at least part of the year. That’s why the outdoor ceiling fans are made from tough materials like plastics and stainless steel. The blades can also be made of wood but then ensure that you get timber blades that are specially treated for outdoor use. If you do use timber blades outdoors you should expect to replace the blades more frequently than moulded blades or metal blades. If the fan will be hung where it can actually get wet, you will need to ensure that it is designed to handle this condition.

 

For Outdoor use choose one of these fans:

 

Ceiling Fans with Lights
Most of the Ceiling Fans are also available with light. There are ceiling fans which have an already integrated light and there are some you can buy it as an additional accessory and use your fan with or without light. A light can be attached at the bottom of the fan. To ensure that fan and light finishes match buy both from the same brand.

 

Mounting Your Ceiling Fan
You should install your Ceiling Fan in the middle of the room and at least 2.15 meters above the floor however for optimal airflow you should install it 2.5 meters above the floor. This is the height at which most fans are designed to operate. For ceilings that are higher than this you can use a downrod to lower your ceiling fan for optimal operation. Normally the lower a ceiling fan hangs the more airflow you will feel when you stand directly under it. But the airflow is then also more concentrated on a smaller area. This is especially important during the summer time when the primary purpose of the fan is for cooling. If your ceiling fan hangs higher you won’t feel a breeze but the air will disperse over a larger area. In winter time this can be a good option. The ceiling fan can move the warm air from the ceiling back down.

 

If you want to place multiple fans inside a house you shouldn’t place ceiling fans too close together in the same room because they work then against each other. The circulation from one room to another can make the air quite pleasant during the hot summer months.

 

Caring for your Fan
Usually you can only see your ceiling fan from the bottom where no dust can collect. Therefore many people neglect to clean their fans. However, it is really important to clean your ceiling fan because dirt and dust can make your ceiling fan noisy, wobbly and it can even damage the motor. In addition, the collection of dust on the fan can represent a health hazard over time. Therefore, to clean the blades of your ceiling fan, wipe the dust with a paper towel regularly.

Leave a Reply