Hunter Pacific - Concept 2 52" Ceiling Fan

Hunter Pacific - Concept 2 52" Ceiling Fan

The Concept 2 is a 1320mm (52") ceiling fan, similar to the original Concept with the exception of the conical canopy cover, the screw cover plate and its flatter motor housing, which were all added to modernise it to suit current architectural trends. The blades attach directly to the motor housing eliminating the need for an external blade carrier. The Concept 2 also has an integrated clip-on light system which is available as an accessory. This allows users the flexibility of adding a light to the fan at a later time.

Features

Original Australian Design
Pre-Assembled Motor and Down Rod
Die-Cast Aluminium and Body
Reversible Air Flow for Summer/Winter Option
2 Year in Home Warranty
Additional 3 Year Parts Warranty
Suitable For Raked Ceiling up to 28 degrees

Installing Location
Concept 2 ceiling fans can be installed in a variety of locations both inside the home as well as in out door areas provided that the roof is sealed and there is no opportunity for water to encroach on the motor. Both timber and plastic blades are fine for outdoor installations however we do recommend plastic blades over timber blades as they will withstand outdoor conditions better.Please note if timber bladed fans are installed in outdoor locations the blades may needed to be replaced more regularly as the blades may warp to exposure to higher levels of moisture in the air.

Motor Housing
The Concept 2 motor housing is made from die cast aluminium thus joining within the material is eliminated. This significantly extends the longevity of the product, as the opportunity for rust and material degradation is almost completely removed. Concept 2 ceiling fans are available in a range of finishes including white, white birch, black, brushed aluminium and polished aluminium.The Concept 2 ceiling fan has a 16 pole, 153mm x 18mm motor. All Hunter Pacific fan motors use vacuum impregnated high-grade copper windings, silicon-steel stators and sealed bearings for long life and quiet operation. The wall controller in conjunction with the stator windings ensures optimum speeds for all conditions. With minimal motor movement and a cool operational temperature this powerful motor is guaranteed lasting operation.

Blade Material
Concept 2 is a 4 bladed, 1320mm (52") ceiling fan. The blades are made from New Zealand plywood and are placed into sets based on accurate weight measurements removing almost all unwanted movement during fan operation. Blades are painted with finishes that match the motor housing colours and the paint also acts as an additional layer of protection on the wooden blades.

Blade Pitch
The blade pitch is 12 degrees allowing the fan to produce greater air flow.

Accessories